As a more reliable fencing material than wood, composite fencing is a good choice. Because composite fencing requires less upkeep than wood does, homeowners adore it. Does this suggest that composite fencing requires no upkeep?

The short response is “Yes “. The truth is that plastic wood fencing needs some upkeep, much like other composite materials.

After you buy and install your composite fencing, you must routinely maintain it to keep it looking nice and extend its lifespan. Cleaning is a part of the upkeep you provide for your composite fencing, unlike aluminum fence, wooden fence and wrought iron fence. Also, you have the option of painting or staining your composite fence. However, we don’t advise it because it wasn’t made to be painted or stained.

How to Maintain Your Composite Fencing

Mildew and Mold

The same methods used to remove grease and oil also eliminate mold and mildew. Although it is less typical for them to grow on composite fencing than wood, some conditions will allow them to flourish.

Mold will develop there and warp the surface of your horizontal fence if you let leaves and pollen decompose on it. After this, all you require to clean up is a soft brush and a pail of soapy water.


When the scrape is well embedded in the fence, abrasions can be challenging to remove. After 12 to 16 weeks, minor scratches may naturally fade or disappear due to weathering. The stainless steel scourer can be used gently if the composite fence has a sanded surface. Although at first glance it could seem lighter, this will weather.

Any abrasion on your fencing may be more difficult to remove if it has a woodgrain finish. You can softly go over the scratch with a heat pistol set to 450°C settings, keeping the nozzle 10-15 cm away from the fencing to prevent overheating the fence.

Before using the procedure on your actual fence, it is advised to practice on a cut-off or sample of the fence to ensure that it is effective.

Dirt, Mud, and Debris

If mud, dirt, or other debris gets stuck to your fence, you should clean it off. Simply use a soft bristle brush to sweep the surface and let the mud or debris fall off. You can rinse the surface of your composite fence with a hose to get a clean finish. To clean the surface of your composite fencing without using a brush, use a towel dipped in water.

Ice and Snow

You can take care of clearing the snow and ice that has built up on and around your composite fence. To complete the task, a plastic shovel should be used. Metal shovels can more quickly harm your composite fencing gate, so we advise against using them and to use plastic shovels. Care must be exercised, though, as plastic may still scratch the plastic.

Oil and Grease Stain

Your composite fencing typically gets grease and oil stains on it. Unlike wood, composite fencing won’t collect much grease or oil stain. You will want a soft brush and soapy water to remove these stains. The surface of your composite fencing will be scratched if you use a hard floor brush. Thus, a gentle brush is what we advise.

Wait for the area to absorb the water after applying the soapy water. You can then use your brush to clean the area once the soap in the water reacts with the stain and weakens it. Afterward, use a hose to rinse the surface. If this is unsuccessful, a composite cleaner should be able to remove the discoloration.

Tannin Stains

Another substance that might warp the surface of your composite gate fence is a tannin stain. During the fading process, the natural wood oils will drain out and could result in water stains. This typically occurs after extended rainstorms. There is no cause for concern here. That should go away after six months because that is the typical process for composite wood.

You naturally want your modern fence to look its best, so clean it whenever you notice blemishes on it using the customary warm soapy water and a soft bristle brush.

Calcium Chloride

To melt ice and snow, calcium chloride is frequently employed. If you don’t get rid of it right away, it could ruin the surface of your composite fence. Once more, use warm, soapy water and a soft-bristle brush to hose clean composite USA fence.

Ink and Chalk Marks

The removal of colored marking chalks from fence gate door is extremely challenging. You might try rinsing the stain with water and letting it eventually go. If using water is not possible, you might need to use a Marking chalk cleaner/remover to remove the chalk line.

Pressure Washer

Using a power washer is generally not advised since it could harm the fence. If you decide to use a pressure washer, keep the hose away from the fence by at least 25 to 30 cm and at a maximum pressure of 3000 PSI. Your composite fence’s surface will peel if you bring it too close to the fence panels or a sliding gate fence.

Wrapping It Up

To keep your composite fencing in good shape and help it live up to its predicted lifespan, you must maintain it. With the point mentioned above, your composite fencing can be easily and quickly maintained. However, you must also ensure that you buy your composite fencing, alumimum fence panels, etc from the best gate fence manufacturer in Southern California – Globus Gates.